Kugelfischer Warm-Up Regulator Repair Kit Instructions ↗
Step-by-step for rebuilding the tii warm-up regulator with a new wax actuator and water-seal O-ring. It covers calibrating the air cone height before refitting, re-engaging the enrichment lever and setting the top-hat washer gap without touching the 'verboten' screw, then rechecking idle through a warm-up cycle.
Tools mentioned: Pin wrench, 2 mm Allen key, retainer plate (in kit), sockets
2002FAQ is behind a Cloudflare challenge; read via search-engine copy. The kit is sold by the 2002FAQ store.